BVM
Technologies manufactures all range of after coolers suitable for all
type of air compressors. It is used to reduce the air temperature. It is
mounted in vertical position with moisture separator.
Our Compressed highly efficient aftercoolers are an economical way to
remove water vapor and cool compressed air to useable levels preparing
for further filtration and drying applications.
Air -Cooled AfterCoolers
It provide economical cooling by using ambient air to cool the hot
compressed air from an air compressor. Discharge air from an air
compressor is generally 180?F - 350?F, depending on the type of
compressor. As the compressed air cools, about 60% of the water vapor
present condenses into liquid water which should be immediately removed
from the system with a separator. Air-Cooled AfterCoolers can be sized
to cool the hot compressed air to within 5?F to 20?F of the ambient air
temperature. Aftercoolers can be installed so normal wasted heat can be
reclaimed and recirculated.
Water-Cooled AfterCoolers
Water-Cooled AfterCoolers and separators are an ideal combination to
remove troublesome moisture from compressed air. With proper
installation of aftercoolers and matching liquid separators, conclusive
proof has shown that they perform effectively in maintaining
trouble-free operation of compressed air equipment. By lowering the
temperature of the compressed air in downstream air lines using
water-cooled aftercoolers, up to 70% of the water vapor present
condenses to a liquid, which can then be removed by moisture separators.
